38
INERRUPTING AND CHANCHING
THE PROGRAM
432555
Manual (physical) termination
The program can be cancelled / terminated
by rotating the program selector dial (1) to
the position. “0FF” position.
If there is water in the machine, select an
independent spinning program (using the
program selector knob) and select the
spinning rate using one of the keys (3).
PAUSE KEY
The program can always be stopped by
pressing the START/PAUSE. If there is no
water in the drum, the door can be opened
after a while; otherwise, the door cannot be
opened. To resume the program, press the
START/PAUSE key.
FAULTS
In case of a fault, the program will be
interrupted. Flashing signal lights and
an acoustic signal will warn about such
occurrence (see section Troubleshooting),
and the fault will be indicated on the display
(E).
Power failure
At electric cutout the program is
interrupted. When the power supply is re-
established, press the START/PAUSE key
to resume the washing program. Delay time
will not be reset.
Washing time will resume from the point at
which it was interrupted.
The most recently selected program,
including all extra functions selected (spin,
pre-wash, extra water), will be saved,
except for ECOstyle and delayed start.
Содержание Simplicity WA74SY2B
