Gorenje SGT 2400 I PRO, Инструкция по эксплуатации, Страница: 45 / 120

45
VERTICAL STEAMING
You can also remove wrinkles on delicate garments in
hanging position, hanging curtains, or other hanging
fabrics:
1.Select your desired temperature setting with
steam ironing available.
2. Hold the iron in vertical position (Figure 7) 15 to 30
centimeters away from the garment.
3. Press the steam trigger.
Warning: Do not apply steam on any clothes or fabrics
that are being worn by human or pets. Temperature of
steam is very high.
Figure7
SAFETY AUTO SHUT-OFF FUNCTION
The safety auto shut-off function will operate automatically when the iron is left immobile or the
function button/steam trigger not being pressed for 10 minutes
.
1. A
“beep” sound will be hear with the Auto Shut off
Indicator will be flashing (Figure 8) to indicate the
appliance is under safety auto shut off function.
2. To reactivate the iron, simply move it or by pressing
the function button or the steam trigger. The control
panel will return to its previous temperature setting and
start heating up. It may take about
60 seconds for the iron to be ready for use.
Figure8
Note: The appliance is not switched off completely when it is in safety auto shut off
function. Press and hold the function button to turn the appliance off and unplugged
from the mains supply outlet.
RAINING THE WATER TANK
Disconnect the iron from the mains supply outlet.
1. Pull the water tank out (Figure 9).
2. Open the Water Inlet Cover and drain the water tank with low hardness water (up to 7dH)
(Figure 10).
3. Put the water tank back and make sure that it is firmly positioned in place (Figure 11).
Figure10
Figure11
Figure9