Gorenje RB4122ANW, Подробная инструкция по применению

Страница: 15 / 32

15
CHANGING THE DIRECTION OF
DOOR OPENING
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest
the unit on something solid so that it will not slip during the door reversing
process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It’s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge of freezer door. Then remove the door and
place it on a soft pad to avoid scratch.
5. Move door holder from left side to right side.
6. Move hinge hole cover from left side to right side.
7. Rotate freezer door and place hinge side at left side. And then fix the door
by holder.
8. Unscrew bottom hinge. Then remove the adjustable feet from both side.
9. Unscrew and remove the bottom hinge pin, turn the bracket over and replace
it.
10. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
11. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally tightening
the top hinge.
12. Put the top cover and fix it with 2 screws on the back.