Instructions for Use
17
Maintenance and Cleaning
Automatic Defrosting of the Refrigerator
There is no need to defrost the refrigerator,
because ice depositing on the inner back wall
is defrosted automatically.
Ice is depositing on the inner back wall during
the compressor operation; later on, when the
compressor is not operating ice is defrosting
and water drops collect and drain through the
outlet in the inner back wall into the drain pan
situated above the compressor, from where it
evaporates.
Cleaning the Appliance
Disconnect the power supply before
cleaning the appliance.
Do not use coarse or aggressive cleaning
agents as you can damage the surface.
Be careful to remove any cleanser agent
remaining after cleaning.
x
Clean the
exterior
with water and
detergent.
Varnished surfaces are cleaned with soft
cloth and an alcohol based cleaning agent
(for example glass cleaners). You may also
use alcohol (ethanol or isoprophylic
alcohol).
The application of abrasive and specially
aggressive cleaners, such as the stainless
steel cleaners, is not appropriate for the
cleaning of plastic and coated parts.
x
Remove the
detachable accesories
in the
interior of the appliance and clean it with
water and liquid detergent. Plastic parts
cannot be washed in washing machine.
x
Wash the
interior
of the appliance with
lukewarm water, in which you added one or
two spoonfuls of vinegar.
x
Every now and then wipe the
condenser
on
the rear wall. Use soft non-metal brush or
vacuum cleaner.
x
Do not forget to clean also the defrost water
receptacle
above the refrigerator
compressor (do not remove the receptacle).
After cleaning, connect the appliance to
power supply and reload the packages.
Switch Off the Appliance When Not In
Use
If you do not intend to use the appliance for a
longer period, set the thermostat knob to the
STOP (0)
position, disconnect the power
supply, take out the foods and defrost and
clean the appliance. Leave the door slightly
open.
Trouble-Shooting Guide
During the service, you can come across
some troubles that in most cases result from
improper handling of the appliance and can
easy be eliminated.
The Appliance Fails to Operate After
Connecting to the Mains Supply
x
Check the supply in the outlet socket and
make sure the appliance is switched on
(thermostat knob in operating position).
Continuous Operation of the Cooling
System
x
The door was frequently opened or it was
left opened for too long;
x
The door is not properly closed (the door
may sag, the gasket may be polluted or
damaged);
x
Perhaps you have overloaded the appliance
with fresh foods;
