17
8. Place the lower door on a smooth surface with its panel upwards. Loose screw
(2) and part (1), then install them to the left side and tighten securely.
9. Change screw hole covers on middle cover plate from left to right (as shown in
figure below).
10.Lay the refrigerator on soft foam packaging or similar material. Remove both
adjustable bottom feet parts, and the lower hinge part by unscrewing the
special flange self-tapping screws.
1 Stop block
2 Self tapping
screw
screw hole covers
screw hole covers
1 Lower hinge part (right)
2 Adjustable bottom feet part
3 Self tapping screws
