21
This appliance is marked according to
the European directive 2012/19/EU on
Waste Electrical and Electronic
Equipment (WEEE). This guideline is the
frame of a European-wide validity of
return and recycling on Waste Electrical
and Electronic Equipment.
Caution
Always place the appliance on a flat, stable
surface.
Do not use the citrus press longer than 10
minutes without interruption.
This appliance is intended for household use
only.
Never use any accessories or parts from other
manufacturers unless they are authorized by
Gorenje. In case you use these accessories the
warranty will be canceled.
Before use
Clean all detachable parts before using the
appliance for the first time (see chapter
‘Cleaning’).
Make sure the appliance is assembled properly
(see chapter ‘General description’) before you
plug it in the wall socket.
Put the plug in the wall socket.
Using the appliance
MIXER BLADE/ WISK/ DOUGH HOOK
Your accessories are equipped with a system
for adjusting the height above the bottom of the
bowl for optimum results. Depending on the
nature of the ingredients, the bowl (9) with its
cover can be used to prepare up to 2.3 kg of
dough.
Press the release button for the multifunction
head (10) up, lift the multifunction head then fit
the bowl(9) onto the appliance by turning until it
locks into position. Place the ingredients in bowl
first.
Put the stainless steel bowl cover onto the
stainless bowl and insert the mixer blade, hook
or whisk (depending on the consistency you
prefer). Adjust the height by turning the shaft:
adjust the accessories to the ideal position.
Press the multifunction head (8) of the
appliance down until a click is heard.
During preparation, you can add ingredients
through the opening in the cover.
To stop appliance operation, turn the knob (10)
back to 0.
Before using for the first time, clean all parts of
the accessories with soapy water, rinse and
dry.
Place the appliance on a flat, clean and dry
surface and then plug in your appliance.
SLICING/SHREDDING DISCS
Fit the multifunction head of the appliance (7) to
a horizontal position and then remove the cover
(4).
Fit the food processor bowl on the power outlet
for the food processor bowl (6) and lock it in
position by turning it anticlockwise. The food
processor bowl will not fit on the blender power
outlet (5)
Place the medium shredding disc, fine
shredding disc, coarse shredding disc or thick
slicing disc / medium slicing disc (depending on
the consistency you prefer, using only one
slicing / shredding disc at a time ) onto the
worm shaft.
Then put the cover onto the food processor
bowl
Add the ingredients to be processed.
Содержание MMC1500BK
Страница 3: ...3 ...
