background image

Instructions for Use

10

environmental protecting precautions. (See We Care for the
Environment).

• 

Heating element incorporated in the appliance, all around
the rim, is controlled by the operation of the compressor and
it prevents the door gasket to freeze on to the freezer
housing.

• 

If the supply cord is damaged, it must be replaced by the
manufacturer or his service agent or a qualified person in
order to avoid hazard.

• 

The rating plate is inside the appliance or outside on the rear
wall.

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household

waste disposal service or the shop where you
purchased the product.

Storing Time During Power Supply Interruption

Do not open the freezer in case of failure or power supply
interruption! In case the interruption is extended over longer
period of time (16 hours), take food out of the freezer and use
it, or make sure that is sufficiently cooled (perhaps you have an
extra appliance).

Disposing of the Worn Out Appliance

• 

When your appliance finally wears out, dispose it of. If the
appliance has a lock, break it, in order  to prevent eventual
accidents (danger of children get locked inside the
appliance).

• 

The refrigerating system of the appliance is filled with
refrigerant and insulating substances which should be
separately treated and processed. Call your nearest
authorised service agent or specialised servicing centre. If
you don't find one, contact your local authorities or your
distributor. Be careful not to damage the tubes on the rear
wall of the appliance (danger of pollution).

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regulariy ventilated room.
Allowed ambient temperature depends on the model (class) of
the appliance and is stated on the rating plate of the appliance.
If you have amodel with integrated switch for intensive cooling,
consider the instructions in chapter "Temperature selection".
Never place the appliance near heat emitting devices (e.g.
cooker, radiator, water heater or similar devices) and do not
expose it to direct sunlight.
The appliance should be positioned at least 3 cm away from
the electric or gas cooker and at least 30 cm away from the oil
or coal stove. If this is not possible, use an appropriate
insulation.
Behind the appliance there should be free space at least 200
cm²

 

 wide and above the appliance the high kitchen units

should be at least 5 cm away from the appliance in order to
assure adequate ventilation of the condenser unit.

Class

Ambient temparature

SN (subnormal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

ST (sub-tropical)

from + 16°C to + 38°C

T (tropical)

from + 16°C to + 43°C

Placing the Appliance

• 

Place the appliance firmly on a solid base. Some appliances
have adjustable feet on the front side; use them to level the
appliance.

• 

Two spacers attached to the appliance must be fitted onto
the upper edge of the condenser, thus preventing  the
appliance from being installed too close to the wall. Spacers
are manufactured for all-purpose function depending on the
distance of the condenser from the wall. Therefore turn
spacers correspondingly and fix them to the appliance.

• 

The appliance may stand freely or it can be placed next to a
kitchen furniture element or a wall. Mind the space required
to open the door and pull out the drawers and shelves (see
installation diagram).

35 mm

90

o

Connection to Power Supply

Connect the appliance with the cable and plug to the power
supply socket outlet with a ground terminal (safety socket).
Required nominal voltage and frequency are indicated on the
rating plate. The connection to the mains supply and earthing
have to be made according to current standards and
regulations. The appliance resists temporary voltage tolerance
up to -6 to +6 %.

Содержание K287MLB









Отзывы: