Gorenje IS655ST, Подробная инструкция по применению, Страница: 12 / 32

12
512850
THE INDUCTION HOB SWITCHING ON
Press the A sensor (line switch). Symbols
of control displays C, D and E will light up. If
you would not provide a following selection
up to 60 seconds, the induction hob would
be switched off automatically.
THE COOKING ZONE SWITCHING ON
Choose the appropriate cooking zone or flexi-zone by pressing the C or D sensor.
Set the required performance level (1-9) with help of B sensor within 5 seconds after
switching on the induction hob .
CAUTION
The sensor control is activated by touching a finger to appropriate symbol on glass
ceramic hob. Therefore keep the control panel clean and dry.
Do not put objects on the induction hob control panel.
Do not allow the using or cleaning of plate's cooking surface by children.
Prevent all unwished switching on of the appliance, for instance with pets!
The set up parameters will be deleted after disconnection of induction hob form the
power net.
Never lay down food packaged into aluminum foil, knifes and forks, pot lids or other metal
objects on the induction cooking zones. These objects could be heated up very quickly
and cause burning or damages at unwished or unintentional switching on of appliance.
After removing of the pot from cooking zones, the hob will be switched off in 60 seconds
automatically.
Switch off the induction zone with the corresponding switch after using it; do not rely up
to automatic switching off (pot recognition).
The input power of cooking zones is regulated within the range of 9 levels which are
infinitely selectable by means of the “B” sensor on the control panel.
THE POT RECOGNITION ON THE INDUCTION COOKING ZONE
If the cooking zone is switched on but
there is no pot or the pot is not suitable for
induction cooking, no heat is transferred.
Symbol " " is flashing.
If there is a suitable pot on the cooking
zone, the set power level is switched on and
the number of power level is displayed. The
heat transfer is interrupted when the pot is
removed. Symbol " " is flashing.