Gorenje IQ641AC, Инструкции по использованию, установке и подключению

Страница: 13 / 32

380
354
The automatic heat-up function temporarily increases the
power (setting ‘9.’) to heat the contents of the pan faster.
This function is available in all settings except the ‘Boost’
setting and setting ‘9.’
Switching on the automatic heat-up function
The hob is switched on and a pan has been placed on the
hotplate.
1. Touch the slide control of the selected hotplate with the
tip of your fi nger to the desired position, and keep the
fi nger pressed for about 3 seconds.
2. Letter A is indicated in the display. If your power
selection is 4, the letter A and the setting 4 will
alternately fl ash on the display.
3. Attention! When the pan has reached the desired
temperature, the automatic heat-up function
automatically switches off and the hotplate continues at
the set power.
The table below shows the duration of the automatic heat-
up function for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
Switching off the automatic heat-up function
The hob is switched on A and the power setting fl ash
alternately in the display.
1. Touch the slide control sensor to select the relevant
hotplate.
A diff erent power setting is shown in the display and
A
stops fl ashing. Or:
2. Select setting ‘9.’. Or:
3. Select the relevant hotplate by touching the slide
control sensor at the far left side. The display shows
setting ‘0.’,
A
stops fl ashing and the hotplate is switched
off .
The ‘Boost’ function is used to cook at maximum power
for a short period of time (maximum 10 minutes). The
power is reduced to setting 9 at the end of the maximum
boost time.
Switching on the boost function.
The hob is switched on and a pan is on the hotplate.
1. Touch the button of the relevant hotplate (you can
also use this button if power had been previously set).
2. The boost function is immediately active.
Automatic heat-up
function
Boost function
13