Gorenje ICG3400DP, Руководство пользователя

Страница: 35 / 96

35
Control of the cooking hob and cooking zones
1. Upon connection of the glass ceramic hob to the power mains all indicators will briefly light up. The cooking
hob is now ready for operation. The cooking hob is fitted with electronic sensors that are activated when the
indicated area is touched with a finger for at least 1 second. Each time a sensor is activated, this will be
confirmed by an acoustic signal and a lit LED indicator.
2. Do not place any objects on the sensor surface. Make sure the sensor area is always clean. Place a piece of
suitable cookware on the middle of the cooking zone.
Left cooking zone
Φ260mm;2,0kW

Press the sensor to switch on the cooking hob. Touch the sensor and keep pressed for at least 1
second. The cooking hob will be activated. " - - - - " will be displayed, and an acoustic signal will be heard.
Then, the appliance is ready for further function settings (note: if no function is selected or set in the following
30 seconds, the appliance will be switched off, which will be indicated by an acoustic signal).

Then, press the sensor. The cooking hob will automatically start to operate with a power of 1400 W. Use
the or sensor to adjust the power (200W, 400W, 600W, 800W, 1000W, 1200W, 1400W, 1600W,
1800W, 2000W). The hob can be switched off at any time by pressing the sensor. All settings will be
deleted.

In order to specify the cooking temperature, press the sensors again. The hob will start to operate at a
preset temperature of 2
20 °C. Use the
or sensor to adjust to temperature as desired in the range
(60
°C, 80°C, 100°C, 120°C, 140°C, 160°C, 180°C, 200°C, 220°C, 240 °C). The hob can be switched off at
any time by pressing the sensor. All settings will be deleted.
Right cooking zone
Φ260mm;1,4kW

Press the sensor to switch on the cooking hob. Touch the sensor and keep pressed for at least 1
second. The cooking hob will be activated. " - - - - " will be displayed, and an acoustic signal will be heard.
Then, the appliance is ready for further function settings (note: if no function is selected or set in the following
30 seconds, the appliance will be switched off, which will be indicated by an acoustic signal).

Then, press the sensor. The cooking hob will automatically start to operate with a power of 1000 W. Use
the or sensor to adjust the power (200W, 400W, 600W, 800W, 1000W, 1200W, 1400W). The hob
can be switched off at any time by pressing the sensor. All settings will be deleted.

In order to specify the cooking temperature, press the sensors again. The hob will start to operate at a
preset temperature of 220
°C. Use the
or sensor to adjust to temperature as desired in the range
(60
°C, 120°C, 150°C, 180°C, 200°C, 220°C, 240 °C). The hob can be switched off at any time by pressing
the sensor. All settings will be deleted.
Programmable timer
Programmable timer will switch off each activated cooking zone after the set time expires. Cooking time
can be set in the range from 1 to 179 minutes.
Switch on the cooking hob. Switch on one or more cooking zones and select the desired cooking power
for each one.
Press the sensor. "00:30" will appear on the display. Now use the or sensor to set the time.
Use the sensor to set the minutes and the sensor to set the hours. If you press and hold the
sensor, the setting on the display will change at an increasing rate.
To check the remaining cooking time, press the sensor. The preset time can be changed during
operation by pressing the or sensor.
Important:
When the time expires, the cooking zone will be switched off. A short beep will be heard.