5
PRODUCT INSTALLATION AND
OPERATING INSTRUCTIONS
1.) Product installation
Step 1
：
Open the packing, take the product out and take off the poly-bag.
Step 2
：
Set the machine up, install base and fix screw on the smooth surface.
2.) Operating instruction
Connect the power cord with correct power supply and turn on the power switch on the back of the
product.
3.) Humidifier function:
Switch knob for start and increase humidifier function, down for the
decrease humidifier function and turn-off.
Green indicating light
→
humidifier on.
Red indicator light
→
short of water, humidifier stops. After adding
water, it turns into green light and restart.
Heater and humidifier can work at the same time.
4.)
Power ON/OFF:
By pressing
key, the device start working. Press it again,
device is turned off, digital LCD display show shutdown function (10
→
0).
Default settings during first start up:
Low heating power
.
LED display show default temperature 25
℃
.
Fan ON.
Timer and swing OFF.
5.)
Temperature setting:
By pressing
button , enter in to temperature settings, the temperature indicator light will
be on, the LED light will flicker.
Temperature range 5
℃
~ 35
℃
. Press
key to set temperature.
Room temperature > Set temperature:
Ceramic heater and fan OFF
Room temperature 2
℃
lower < Set temperature:
Heating function and fan ON
When setting the time and temperature at the same time, timing, and the room temperature
and timing display interactively, interval is 30 seconds. When the timing is not set, only display
setting temperature.
If no operation to the keys after 5 seconds, then the LED indicator will show the room
temperature.
Indicator light
Knob for start and
increase humidifier
function
E
N
