18
Tension adjustment
of the door spring
【Figure5】
Tension adjustment of the door spring
●
The door springs are set at the factory to the proper tension for the outer door. If aesthetic
wooden panel are installed, you will have to adjust the door spring tension. Rotate the adjusting
screw to drive the adjustor to strain or relax the steel cable(see figure 5).
Door spring tension is correct when
the door remains horizontal in the
fully opened position，yet rises
to a close with the slight lift of a
finger.
Connection of drain hoses
●
Insert the drain h ose into a drain pipe with a minimum diameter of 40mm, or let i t run into the sink, making sur e to
avoid bendin g or crimping it. The top of the ho se m ust be less than 100 0mm.
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ
40mm
B
Содержание GV63214
Страница 1: ...GV63214 ...
