Gorenje GV63160, Руководство по эксплуатации

Страница: 13 / 20

Troubleshooting
Action Type of fault on the display
Clear the drainage pump. See the section Care and cleaning. If the problem
persists, call the service department. Overfilling F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem
persists, call the service department. Water outlet fault F11
Check that the water tap is on. If the problem persists, call the service department. Water inlet fault F12
Turn off the water tap and call the service department. Inlet valve leakage F40
Check that the drainage hose is fitted in accordance with the installation
instructions. If the problem persists, call the service department. Water level fault F52
Turn off the water tap and call the service department. Overfilling F54
Call the service department. Circulation fault F56
Press any button to clear the error message.
Action Possible causes Problem
Wait a moment then try again. You have pressed the buttons too soon
after opening the door. The buttons do not react when pressed.
Clean with a dry or slightly damp cloth. The buttons are dirty.
Open the door. The buttons only react
to use when the door is open. The door is closed.
Check that the baskets are correctly
positioned horizontally. The baskets are not correctly positioned. Cannot close door.
Check that the dishes are not blocking
the baskets from sliding properly into
place.
Check. The door is not properly closed. The dishwasher does not start.
Close the door and wait. After a while,
the dishwasher continues the
programme. You have opened the dishwasher to add
more dishes while a programme is in
progress.
Check. A fuse/circuit breaker has been tripped.
Check. The plug is not plugged into the wall
socket.
Check. The water tap is turned off.
Check. Overflow/leaks.
Turn off the water tap. Pull out the plug
and call the service department. A whirring sound (the drainage pump)
is heard from the dishwasher and does
not stop when the main power switch is
turned off.
Press and hold the main power switch
until the display turns off if you want to
cancel the Delayed start option. Restart
the dishwasher. Check that the Delayed start option has
not been selected.
13