Gorenje GV62010UK, Руководство по эксплуатации

Страница: 8 / 18

8
Settings
Adjusting salt consumption
T
he dishwasher is designed to allow for adjustment in the amount of salt consumed based on the
hardness of the water used. This is intended to optimise and customise the level of salt consumption.
1. Switch on the appliance;
2
.
Open the door, Press the program button more than 5 seconds to start the water softener set mode within
60seconds after the appliance was switched on;
3. Press the program button to select the proper set according to your local environment, the
sets will change in the following sequence:
H4->H5->H6->H1->H2->H3;
4.
Press the Power button to end the set up model.
Please follow the steps below for adjustment in salt consumption.
dH dH
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German German
Salt consumption
(gram/cycle)
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
0
9
12
20
30
60
French French
fH fH
Mmol/l Mmol/l
Water softener level
British British
Clarke Clarke
WATER HARDNESS
H1-> Rinse Light bright
H2-> Quick Wash Light bright
H3-> Rinse, Quick Light bright
H4-> ECO Light bright
H5-> ECO, Rinse Light bright
H6-> Eco, Quick Light bright
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
Adjusting the rinse aid
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1
.
Power on the dishwasher by plugging in;
2 .
Open the door, within 60 seconds after step 1, press the Program button more than 5 seconds, and
then press the half load button to enter the set model, the rinse aid indication blinks as 1Hz
frequency.
3
.
Press the Program button to select the proper set according to your using habits, the sets will change
in the following sequence: D1->D2->D3->D4->D5->D1, The higher the number, the more rinse aid
the dishwasher uses.
4
. Without operation in 5 seconds or press the power button to exit the set model, the set success.
Selector position
D1-> Rinse Light bright
D2-> Quick Light bright
D3-> Rinse + Quick Light bright
D4-> ECO Light bright
D5-> ECO + Rinse Light bright
Amount of rinse aid (mL)
1.2
2.4
3.6
4.8
6.0