Action
Possible causes
Problem
Check that the salt compartment lid is
properly tightened. Otherwise call the
service division.
The water softener is leaking salt.
Spots or films on the dishes.
See the section Settings.
Incorrect water softener setting.
See the sections Before washing for the
first time and Settings.
Incorrect rinse aid dosage setting.
Top up with salt. See the section Before
washing for the first time.
Salt compartment empty.
Inactivate the setting TAB (3-in-1/
All-in-one detergent) and top up salt and
rinse aid.
3-in-1/ All-in-one detergent is used and
the setting TAB (3-in-1/ All-in-one
detergent) is activated.
Wash crystal at a low temperature and
with a conservative amount of detergent.
Contact the detergent manufacturer.
Too high temperature and/or too much
detergent can cause etching on crystal.
Unfortunately, this cannot be repaired,
only prevented.
Reduce the amount. See the sections
Before washing for the first time and
Settings. If you have very soft water, you
may want to dilute the rinse aid 50:50
with water.
Rinse aid dosage setting too high.
The dishes have a sticky white/blue film.
Rinse off these types of foodstuffs if not
starting the dishwasher immediately.
Why not use the Rinse programme.
Some foodstuffs, such as mustard,
mayonnaise, lemon, vinegar, salt and
dressings, can mark stainless steel if
left for too long.
Spots on stainless steel or silver.
Silver and stainless steel items should
not come into contact during
dishwashing.
All stainless steel can cause spots on
silver if they come into contact during
dishwashing. Aluminium can also cause
spots on dishes.
Use a detergent with a bleaching agent.
Lipstick and tea can be difficult to wash
off.
Spots left after washing.
Check that the dishes are placed
securely. Spin the spray arms to make
sure they can rotate.
The dishes are not correctly placed or
the spray arms are not rotating.
Rattling sound when dishwashing.
Check.
The door is not properly closed.
The dishwasher does not start.
Check.
A fuse/circuit breaker has been tripped.
Check.
The plug is not plugged into the wall
socket.
Check.
The water tap is turned off.
Check.
Overflow/leaks.
Turn off the water tap. Pull out the plug
and call the service division.
A whirring sound (the drainage pump)
is heard from the dishwasher and does
not stop when the main power switch is
turned off.
Press and hold the main power switch
until the display turns off if you want to
cancel the Delayed Start option. Restart
the dishwasher.
Check that the Delayed Start option has
not been selected.
12