Set the Water hardness
Chapter Settings describes how to adjust
the water softener.
Top up with salt
Salt compartment lid
1. Unscrew the salt compartment lid.
2. Place the funnel supplied with the
dishwasher in the salt compartment
top-up hole. First, pour in about 1 l of
water.
3. Then add salt, a maximum of 1.0 kg,
until the compartment is full. Use large
grain salt or special dishwasher salt.
4. Wipe up any excess salt so that the lid
can be screwed on firmly.
In order to avoid rust stains a dishwashing
programme must be started immediately
after adding salt.
Set the Rinse aid
The section Settings describes how to set
the rinse aid dosage.
Top up with rinse aid
Drying is faster and a better result is
achieved if you use rinse aid. You will also
achieve a better dishwashing result with
clear and spotless dishes.
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the
level marked
max
.
3. Wipe up any splashes of rinse aid
around the compartment.
4. Close the lid firmly.
5
