Gorenje GS63160S, Руководство по эксплуатации

Страница: 12 / 24

Front panel
Keep the buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners
– they can scratch the surface. Use the main power switch
to turn off the dishwasher before cleaning the buttons to
avoid activating any buttons unintentionally.
Unblocking the drainage pump
If the dishwasher still contains water after the programme
has finished, something may be blocking the drainage pump.
Such items are easily removed.
1
Turn off the machine using the main power switch and
unplug it from the wall socket.
2
Remove the coarse filter and the fine filter.
3
Scoop out the water from the dishwasher tub.
4 In order to inspect the drainage pump, remove the
coloured stop on the right in the bottom drain.
5
Turn the pump wheel located behind the drainage pump
stop by hand. Carefully remove any items.
6
Replace the drainage pump stop along with the fine and
coarse filters.
7
Plug the machine in again.
If the dishwasher still does not start and a whirring sound
is heard, the overflow protection has been activated.
•
Shut off the water.
•
Remove the plug from the wall socket.
•
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage pump stop.
Unblocking the inlet hose filter
If the water supply contains small particles, the outer filter
on the inlet hose may become blocked, which results in
Water inlet fault.
1
Turn off the machine using the main power switch and
unplug it from the wall socket.
2
Turn off the water tap.
3
Unscrew the inlet hose.
4
Carefully remove the outer filter from the inlet hose and
clean it.
5
Replace the filter and check that the gasket is correctly
positioned.
6
Screw the inlet hose firmly into place.
7
Plug the machine into the wall socket and turn on the
water tap. Allow the pressure to settle for a while and
check that the connection is watertight.
Outer filter on inlet
hose
Gasket
12