1 3
qrs t uv uw x
yz
t{r|w}
u
~
|~ u
s w}
s
t
{r| w
}
u
~
| w
t s
u
yz
~ y
} t x
u
| u}
| x
cylinder compartment.
Figure
14
Take the cylinder wire inside the
boiler (figure 14 ) and put it in
designated place inside the
cylinder compartment ( Figure 15 ).
Figure 15
Figure
16
Figure
16A
Figure
17
Figure 18
·
Open the door of the lower cabinet and mount the regulator to the cylinder.
·
It should be in such dimensions as those dimensions shown in the Figure 16.
·
As shown in the Figure16A, first place the lower part of the cylinder and then
place the top part of the cylinder (figure 17).
·
As shown in the Figure 18, the gas hose should be mounted without keeping it
long. Make sure the gas hose is not damaged when the cylinder is placed and
removed.
Assembly of Splashback (Optional)
For some versions, we use “Splash Back” instead of the top glass cover; and the
said Panel is located in the Lower Drawer as packed; how to mount this Panel is
described below step by step:
Untighten the screws (10) at the right
and left sides on the rear of the tray
by help of spanner and ensure the
skirt sheet into the channel in the
lower part and tighten the screws
again.
