Gorenje GDV670XXL, Руководство по эксплуатации

Страница: 5 / 32

2 Place the funnel supplied with the
dishwasher in the salt compartment
top-up hole. First, pour in about 1 l of
water.
3 Then add salt, a maximum of 1.5 kg,
until the compartment is full.
4 Wipe up any excess salt so that the lid
can be screwed on firmly.
5 Run a programme to ensure that any
salt in the dishwasher is rinsed away.
Salt compartment lid
Refill salt indicator
When the salt needs topping up, the
above symbol lights on the display.
When the salt runs out, unscrew the cap
and fill the container with salt. Water is
only needed the first time! Wipe clean and
tighten. Run a programme to ensure that
any salt in the dishwasher is rinsed away.
After topping up, it may take a while
before the symbol goes out.
Top up with rinse aid
Drying is faster and a better result is
achieved if you use rinse aid. You will also
achieve a better dishwashing result with
clear and spotless dishes.
1 Open the rinse aid compartment lid.
2 Carefully top up with rinse aid. Only add
rinse aid to the level marked max .
3 Wipe up any splashes of rinse aid
around the compartment.
4 Close the lid firmly.
Press to open
Refill rinse aid indicator
When the rinse aid needs topping up, the
above symbol lights on the display.
After topping up, it may take a while
before the symbol goes out.
Setting the rinse aid dosage
The section Settings describes how to set
the rinse aid dosage. Rinse aid dispensing
can be set from 0 (Off) to 5 (High dose).
(Factory settings: 5)
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue
film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft
water, the rinse aid can be diluted
50:50 with water.
5