444650
If the problem persists despite observing the instructions
above, call an authorized service technician. Elimination of
any errors or warranty claims that resulted from improper
connection or use of the appliance is not covered by our
warranty. In such cases, the costs of repair are borne by the
user.
• Installation of the appliance into a kitchen worktop and its connection to the power
mains may only be performed by an adequately qualifi ed technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be built
in should be treated with heat resistant glue (100°C); otherwise, the worktop fi nish may
be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen
furniture, with a width of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from
below.
• The kitchen furniture element underneath the hob should not be fi tted with a drawer.
If the kitchen furniture element as a horizontal partition wall, it should be installed no
less than 10 centimeters from the lower surface of the worktop. The space between the
partition wall and the hob must be empty; no objects should be placed into that gap.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to
interfere with the work process.
• The distance between the cooking hob and the kitchen hood should be no less than
indicated in the instructions for kitchen hood installation. The minimum distance is 650
mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture
element should amount to no less than 100 mm.
• Use of massive wood decoration plates or boards on the worktops behind the cooking
hob is permitted, if the minimum distance remains the same as indicated in the
installation drawings.
• Minimum distance between the built-in cooking hob and the rear wall is indicated on
the installation drawing.
• Cooking hobs can be installed into worktops that are 30 to 50 mm thick.
Important warnings
If the burner cover looks
unappealing...
Regular dirt
Clean the burner covers with
a metal care detergent.
15
INSTALLATION
