Gorenje FN6192O, Инструкция по эксплуатации

Страница: 7 / 20

460401
• Install the appliance in a dry and well ventilated room. The
appliance will operate correctly if the environment temperature
is in the interval speci
fi ed in the table. The appliance class is
indicated on the rating plate / label with the basic information
on the appliance.
Class Temperature
SN (subnormal) from +10°C to +32°C
N (normal) from +16°C to +32°C
ST (subtropical) from +16°C to +38°C
T (tropical) from +16°C to +43°C
Warning : Make sure the room where the appliance is installed is
large enough. There should be at least 1 m
3
of space per
8 grams of refrigerant. Amount of refrigerant is stated on the
rating plate in the appliance interior.
Appliance installation should be carried out by at least two
persons to avoid any physical injury or damage to the appliance.
• The appliance must stand level or tilted slightly to the back,
stable on a solid base. At the front, the appliance is fi tted with
two adjustable legs that can be used to level the appliance. At
the rear side, casters allow for easier installation of the
appliance (only with some models).
• There should be a clearance of at least 5 cm between the
appliance and any cupboard installed above it, in order to
allow adequate cooling of the condenser unit.
• The appliance is supplied with two spacers which should
be installed on the lower part of the housing to prevent from
pushing the appliance too close to the wall. Appliance may
also be installed without the spacers; however, this may
increase power consumption.
• Do not expose the appliance to direct sunlight and do not
place it near any source of heat. If this cannot be avoided,
install an insulation panel.
Selecting the room
Installing the appliance
7
Installation and connection