Gorenje FK6A Series, Подробные инструкции

Страница: 58 / 64

58
586310
MODIFYING THE BURNERS FOR USE WITH A DIFFERENT TYPE OF GAS
- Modifying the burners for use with a diff erent type of gas does not require removing the
hob from the countertop.
- Before making the modifi cations, unplug the appliance from the mains power and shut
off the gas supply valve.
- Replace the existing nozzle for the nominal heat load with suitable nozzles for the new
type of gas (see table).
- When modifying the appliance for use with liquefi ed natural gas, tighten the minimum
heat load regulation screw all the way to reach the minimum heat load.
- When modifying the appliance for use with natural gas, undo the minimum heat load
regulation screw to reach the minimum heat load, but by no more than 1.5 turns.
After modifying the appliance for use with a different type of gas, replace the old sticker
with gas type information (on the rating plate) with the relevant new sticker and test the
functionality and sealing of the appliance.
Make sure the electric conductors, thermostat capillary, and thermo elements do not
protrude into the gas flow area.
Adjustment elements
- Adjustment elements for minimum heat load of the burners are accessible through the
openings on the control panel.
- Remove the support grid, burner caps and burner crowns.
- Remove the control knobs.
Gas connection plug
A Connection EN ISO 228-1
B Non-metal gasket, thickness 2 mm
C Hose plug for liquefi ed natural gas (depending on the
connection regulations in the specifi c country)
D Hose plug EN 10226-1/-2 (depending on the connection
regulations in the specifi c country)
After connection, check the operation of the burners. The flames
have to burn with clearly visible blue and green core. If the flame is
unstable, increase the minimum power as necessary. Explain to the
user how the burners operate and review the instruction manual
together.
After connecting the appliance, check the seal on all joints.
D