Gorenje EFWH SERIES, Руководство пользователя и инструкции по установке

Страница: 11 / 106

9
When drilling holes in the wall for installation purposes, take care not to
damage any electrical wiring or existing piping.
Electrocution caused by contact with live wires. Explosions, fires or asphyxiation
caused by gas leaking from damaged piping. Damage to existing installations.
Flooding caused by water leaking from damaged piping.
Perform all electrical connections using wires which have a suitable cross
section.
Fire caused by overheating due to electrical current passing through undersized
cables.
Protect all connection pipes and wires in order to prevent them from being
damaged.
Electrocution caused by contact with live wires. Flooding caused by water
leaking from damaged piping.
Use suitable manual tools and equipment (make sure in particular that the tool
is not worn out and that its handle is fixed properly); use them correctly and
make sure they do not fall from a height. Replace them once you have finished
using them.
Personal injury from the falling splinters or fragments, inhalation of dust, shocks,
cuts, pricks and abrasions. Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
PIPE CONNECTION – non preassurized boiler
1. Install the multi-functional valve and water inlet valve to the water inlet of the
water heater.
2. Please refer to the picture for installation requirements and instructions how to
connect heater, water tap, valve and pipes. Ensure that water pipes are clean
and there is no blockage inside pipes. It is necessary to install water inlet
valve.
3. In the heating process there can be a few water drops come out of the safety
valve.