Gorenje E6N1AX, Инструкции по использованию, установке и подключению

Страница: 10 / 16

252584
• Installation of the appliance into a kitchen worktop and its connection to the power mains may only
be performed by an adequately qualifi ed technician.
• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be built in should be
treated with heat resistant glue (100°C); otherwise, the worktop fi nish may be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen furniture, with a
width of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from below.
• The kitchen furniture element underneath the hob should not be fi tted with a drawer. If the kitchen
furniture element as a horizontal partition wall, it should be installed no less than 10 centimeters
from the lower surface of the worktop. The space between the partition wall and the hob must be
empty; no objects should be placed into that gap.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to interfere with the
work process.
• The distance between the cooking hob and the kitchen hood should be no less than indicated in the
instructions for kitchen hood installation. The minimum distance is 650 mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture element should
amount to no less than 100 mm.
• Use of massive wood decoration plates or boards on the worktops behind the cooking hob is
permitted, if the minimum distance remains the same as indicated in the installation drawings.
• Minimum distance between the built-in cooking hob and the rear wall is indicated on the
installation drawing.
• Cooking hobs can be installed into worktops that are 30 to 50 mm thick.
Important warnings
Type EVK4..
min 20
558-560
min 600 488-490
min 40
76
48
min 50
580
510
R10
10
Installation
Kitchen worktop cuto ff
dimensions