19
ELECTRICAL CONNECTIONS
2h
493185
The dryer should be left to stand still for at least two hours
before it is connected to the power mains to allow the system to
stabilize.
Use the power cord to connect the dryer to the power mains
through a power outlet. The dryer may not be connected to the
power mains through an extension cable (danger of overheating
and fire). Nominal voltage and other information is given on the
rating plate located under the door frame.
To prevent from damage by excess voltage on the mains due
to lightning strike we recommend to use a class I over-voltage
protector between the machine and the mains.
After installation, the wall outlet should be freely accessible.
The outlet should be fitted with an earth contact (in
compliance with the relevant regulations).
A damaged power cord may only be replaced by a person
authorized by the manufacturer.
Содержание D9864E
Страница 1: ...EN DETAILED INSTRUCTIONS HOW TO USE YOUR DRYER www gorenje com...
Страница 48: ...SP10 EXCL HP 60Hz AU en 05 18...