33
EN
9.8 USER
MANAGEMENT
9.8.1 Permission Level
Enter the Service Password to enter the Service / Installer level.
9.8.2 Heating/Cooling ON/OFF timer
Disabled
(default setting)
– Normal operation
Enabled
– The Heat Pump Will Heat and Cool only according to the setting of a Timer. In the
other time, it will be only in Antifreeze protection mode.
Please note, that this has no influence on the DHW mode.
SETTING THE TIMER:
Green fields mean that heating/cooling depending on the
ambient temperature is on.
Gray
fields mean that heating/cooling depending on the
ambient temperature is blocked.
9.8.3 Language
Setting the language of the interface.
9.8.4 Set Date and Time
Setting the time and date.
9.8.5 Distribution System Setting
Service setting.
9.8.6 Save Current Settings
Service setting.
9.8.7 Load Saved Settings
Reset all se
ttings to “Install Settings”.
