When the salt needs topping up, the above symbol
lights on the display.
Top up with salt
Before you begin using a dishwasher with a water
softener, you must fill the salt compartment with salt.
Use large grain salt or special dishwasher salt.
NOTE!
Top up the salt just before running a programme.
To avoid the risk of rust stains, the dishwasher
must be rinsed immediately after topping up the
salt.
Do as follows the first time:
1.
Unscrew the lid as illustrated.
2.
Place the funnel supplied with the dishwasher
in the salt compartment top-up hole. First, pour
in about 1 l of water.
3.
Then add salt, a maximum of 1,5 kg, until the
compartment is full.
4.
Wipe up any excess salt so that the lid can be
screwed on firmly.
5.
Run the Normal wash programme with high
temperature so that any salt in the dishwasher
is rinsed away.
When the salt runs out, unscrew the lid and fill the
compartment with salt. Water is only added the first
time! Wipe clean and tighten the lid. Run the Normal
wash programme with high temperature so that any
salt in the dishwasher is rinsed away.
Salt compartment lid
NOTE!
After topping up, it may take a while before the
symbol goes out.
WARNING!
Never pour dishwasher detergent into the salt
compartment. This destroys the water softener!
94 English
Salt
Содержание GDV642X
