GOREK GT-VB800, Инструкция пользователя

Страница: 12 / 12

Vaccum Blender
GT-VB800
GOREK TECHNOLOGIES
101, J.B. Shopping Center-1, Matawadi, L H Road, Surat, Gujarat
Contact: +91-9016891389 | +91-9327460898
● Always allow hot food to cool before processing.
● Do not place any part of the vacuum blender into a microwave.
Hints
● If the blender is overload, remove some of the mixture and continue processing in several
batches, otherwise you may strain the motor.
● Remember that blending hard foods such as coffee beans, spices, chocolate or ice will wear
the blades faster.
● Beware of over processing some ingredients. Stop and check the consistency frequently.
Care and Cleaning
Caution! Danger of injury! The blades are very sharp! Do not touch the blades while
cleaning to avoid injury! For safety reason, the blades are not suited for removing them.
Caution! Danger of electrical shock! Before cleaning and removing parts, switch off the
electric appliance and always remove the plug from the mains. Never immerse the
appliance into water. The connector parts must not get wet. Contact of electrical parts with
moisture can cause electric shock or short circuit and damage.
⚫
Do not use sharp detergents or metallic, abrasive objects to clean the unit as the surface of
the unit or accessories might get damaged.
⚫
If necessary, just wipe the main body with a dry or damp cloth.
⚫
Store the unit in a dry safe place, not reachable by children.
Service and customer care
● If the cord is damaged it must, for safety reasons, be replaced by an authorized repairer.
If you need help with:
● using your appliance or
● servicing or repairs Contact the shop where you bought your appliance.