Gordon RC4000 Series, Руководство пользователя

Страница: 14 / 20

Control Interface
This is an illustration
of the RC4000 Series
control interface.
Indicators and Keypad
Functions are defined
above.
RC4000 Operation
10
www.gordoneng.com 1.800.315.9233
Keypad Controls
SELECT (in setup mode)
push to select reel or dereel mode,
antenna position, and high and low
limit relay activation.
ENTER (in setup mode)
push to lock in SELECT settings
TUNE (in setup mode)
push to tune system
JOG (in setup mode)
push and release to nudge motor
push and hold to run motor
Manual Speed Mode - push and hold,
simultaneously press Enter
use Adjust Up/Down to adjust speed -
any other key terminates this mode
AUTO/SETUP
push to toggle between setup and
auto modes
ADJUST Up/Down (in auto mode)
allow motor-on, realtime loop height
adjustment
Indicators
Bargraph: displays loop height
relative to antenna
Limit lights: lit when loop
height exceeds control range
Run light: on when motor function
is active - AUTO or JOG
Auto light: on when unit is in the
Auto mode - reel motor is controlled
by antenna information
flashes to indicate auto interlock is
engaged
flashes with standby light to indicate
shutoff interlock is engaged
Setup light: on when unit is in the
Setup mode - reel motor is controlled
by Jog function or Manual Speed mode
flashes with standby light to indicate
shutoff interlock is engaged
Indicators
Tune light: flashes when tuning is
required
on while unit is tuning
flashes with fault light on to indicate
antenna fault
Fault light: indicates a loss of
antenna signal or internal fault
Selection indicators: for reel / dereel,
antenna position, and high and low
limit relay activation, the indicators
flash to show they are available for
selection
Use the SELECT key to step through
the choices
Use the ENTER key to set each choice
Indicators stay lit to show how the
unit is configured