SKU 92444 For technical questions, please call 1-800-444-3353
PAGE 10
2.
The Telescope also features a 3x Barlow Lens (23) which triples the magnifying
power of each Eyepiece (21, 22). To attach the 3x Barlow Lens, remove the Star
Diagonal Mirror (5) and insert the 3x Barlow Lens into the Focuser. Then use the
low power 20mm Eyepiece (21), inserting it into the 3x Barlow Lens.
(See Figure H.)
To Attach The Finderscope:
1.
Loosen the two Set Screws located on the base of the Finderscope (2).
(See Figure I.)
2.
Slide the base of the Finderscope (2) onto the mounting bracket on the top of the
Optical Tube (19). Then, retighten the two Set Screws to lock the Finderscope in
place. (See Figure I.)
To Align The Finderscope:
1.
Attach the 20mm Eyepiece (21) to the Star Diagonal Mirror (5).
(See Figure G.)
2.
Locate a distant daytime object, and center the object in the 20mm Eyepiece
(21). (See Figure I.)
3.
View into the Finderscope (2), and observe the position of the same object.
(See Figure I.)
4.
Without moving the Telescope, turn the Adjustment Thumb Screws located on the
side and bottom of the Finderscope (2) until the crosshairs of the Finderscope
are centered on the alignment object. (See Figure I.)
ADJUSTMENT THUMB SCREW
ADJUSTMENT THUMB SCREW
ADJUSTMENT THUMB SCREW
20MM
EYEPIECE
(21)
FIGURE I
