GOPURE UF-5, Руководство пользователя, Страница: 10 / 16

7.
Installing the Pre-Filters:
• The 3 Pre-Filters are located inside their respective housings
• Open each housing using the Large Wrench (F1) provided
• THE FILTERS ARE WRAPPED FOR PROTECTION. MAKE SURE
TO REMOVE ALL PACKAGING FROM THE PRE-FILTERS
• Place the Pre-Filters back into the appropriate housings
according to the colour-coded labels
• Tighten the housings with the Large Wrench (F1) provided
• DO NOT OVER-TIGHTEN THE FILTER HOUSINGS
• Attach the end of the White Tubing (assembled as on page 5) to
the bottom of the Tap by tightening the Steel Fastening Nut
• Attach the other end of the White Tubing to the output side of
the Mineral Ball Filter and fasten with a Circlip in the slot provided
as shown below