The Remote can control up to 5 cameras at a time from up to 196 feet (60m)
away in optimal conditions. Your camera recognizes only one remote at a time.
*
Dependent on camera model, terrain, obstructions, electromagnetic interference,
and environmental conditions.
PAIRING THE REMOTE WITH YOUR CAMERA
1. Power off The Remote.
2. On your camera, complete these steps:
a. From the rear screen, swipe down to access the Dashboard.
b. Swipe right, and then tap Connections > Connect Device > The Remote.
Your camera will automatically begin pairing.
3. Power on The Remote.
4. Look for “Pair New” on the remote’s screen. Press the Shutter button
to
start pairing.
CONNECTING AFTER PAIRING
Your remote and camera will automatically connect when both are on.
Make sure your camera’s wireless connections are on if they fail to connect.
Tap Preferences > Connections > Wireless Connections to turn on wireless.
Heads Up:
Your camera cannot be connected to The Remote and the GoPro
app at a time. You must disconnect the app to connect The Remote or power
off The Remote to connect the app.
Pairing the Remote and Your GoPro
CHANGING MODES
1. Press the Mode button
repeatedly to cycle to the mode
that you want.
2. Press the Shutter
button to start capturing.
3. To stop capturing video or time lapse, press the Shutter button again.
If your camera goes out of range of the remote while you are recording,
recording will continue until you stop it.
CHANGING PRESETS
Press the Preset button
to see all the presets for the selected mode.
1. Press the Mode button
repeatedly to cycle through the presets.
2. Press the Shutter button
to select the preset that you want.
PRO TIP:
Mark favorite moments by pressing the Mode button
on the
remote during recording or playback. This adds a HiLight Tag that makes those
moments easier to find later.
THE FOLLOWING FEATURES ARE NOT AVAILABLE WHEN USING THE
REMOTE WITH YOUR GOPRO
• QuikCapture
• Continuous photo with multiple cameras
• Manual capture of photos while recording video with multiple cameras
Capturing Video and Photos
To see additional information regarding country certifications, refer to the
Important P Safety Instructions included with your remote.
Regulatory Information
