Note: If you are using video output cable that has a connector that allows you to power the camera from the USB
port, then connect your 5 volt (DC) power source to the connector with the black and red cable, making sure that
you observe the right polarity (connecting Positive to Positive and Negative to Negative – normally Black to Black and
Red to Red)
My pictures below show my connection to the Gryphon Voltage regulator
7.4v 2 Cell Lipo Battery connected to one of the 2 input sockets
Output channel from the Voltage regulator connected to the power connector of the Camera’s Video out cable (after
ensuring that the Voltage regulator jumper connector has been set for 5.2volts
