Goplanet Saturn 100, Руководство пользователя

Страница: 20 / 29

Compass Systems Corp. Copyright@2010
4.2 Waypoint Mode
In Bike mode, press the Menu button switches to Waypoint mode. At startup, waypoint A is
displayed. Press the Navigation key 5 ways to cycle through waypoints A~D. When the Menu
button is pressed to exit or access this mode, it will remember which waypoint (A~D) was last
displayed.
(1) Estimated time of arrival shown as TOA.
(2) Estimated direct line distance shown as DTG in MI or KM.
(3) Current speed, shown as mi/h or km/h.
(4) Arrow pointing towards the destination.
After querying GPS signal, press the ENTER button from 5 ways key to set up the waypoint
A~D.
Press the Navigation key 5 ways button to cycle through waypoints A~D.
When the rider is within 50 m of waypoint A, B, C or D, a buzzer will sound 5 times (lasting 1
second each time at 0.5 second intervals). The arrow will also blink each time the buzzer
sounds. The user can press any button to stop the buzzer or wait for it to finish and the arrow
will continue blinking. When within 10m of the waypoint, all eight points of the compass icon
will start blinking and only revert to normal when the rider is more than 10m away from the
waypoint.
This item can only be calculated or displayed when GPS coordinates are available. When
GPS fix has not been acquired, time is shown as --:--:--, distance as ---- and speed as ---. If
speed is less than 5km/hr, time is shown as --:--:--.
Compass Systems Corp. Copyright@2010
21