Remote Controller Reset Procedure
(STEP 1) Remote Controller Side
A.
Take the batteries out of the remote controller and then
replace them.
B.
Push and hold
Mode
button and
then push
SPD
UP
button, the screen will display as pictured,
C.
Release both buttons at the same time.
(STEP 2) Machine Side
A.
Push and hold both the
Speed Up
button (orange color) &
Speed Down
button (black color). They are located on the
side of the motor cover. A continuous beep will sound and
will stop after 3 seconds and then an intermittent beep will
sound. (Keep pushing both keys until this intermittent beep
occurs)
B.
Release both buttons together.
(STEP 3) Remote Controller Side
A.
Point the remote controller (slightly off center) toward the
IR receiver located on the side of the motor cover, then
push and hold the
Reset key
for about 7 seconds.
B.
If a long beep sounds when you release the
Reset key
,
the set up procedures are complete.
