Gopel Electronic G CAR 6282, Руководство пользователя

Страница: 6 / 34

CHAPTER 1. INTRODUCTION GÖPEL electronic GmbH
1 Introduction
1.1 Notes on this document
This document applies only to the device type G CAR 6282 . Any handling of the device requires the exact knowledge
and observance of this manual. The operational safety and the function of the device can only be guaranteed if both
the general safety and accident prevention regulations of the legislator and the safety instructions in the manual
are observed.
The manual is part of the product. Please make sure that all persons who operate the device have read
and understood the manual. Keep the manual in a safe place so that it can be used whenever needed.
This guide highlights some important comments as follows:
Table 1.1: Symbols
Symbol Description
Warning that indicates risk situations and dangers. Disregard can lead to life-
threatening situations.
Information that indicates certain aspects or is important for a particular topic or goal.
Tip that gives useful hints or recommendations.
1.2 Intended Use
The G CAR 6282 is a programmable, intelligent multibus controller with various communication interfaces for au-
tomotive and general control engineering.
Typical applications are:
• Communication with various bus users via CAN/ CAN FD, LIN/ K-Line, FlexRay or Automotive Ethernet for data
acquisition and signal control
• Residual bus simulation and test of complex control units
• Application of transport and diagnostic protocols, network management, XCP, SecOC etc. directly on the
hardware
• Flashing of control units
If you use the device for any purpose for which it is not intended, the GÖPEL electronic GmbH can not
be held liable for resulting damage.
G CAR 6282 1