Gopel Electronic G CAR 6281 Скачать руководство пользователя страница 10

Страница: 10 / 37

CHAPTER 2. COMMISSIONING

GÖPEL electronic GmbH

2.2.2 G CAR 6281

The hardware installation of the stand-alone box

G CAR 6281

is done by connecting the power supply and the con-

trol computer. The

G CAR 6281

starts automatically when the power supply is switched on via the enclosed power

supply unit.

Please use the included LAN cable to connect the stand-alone box

G CAR 6281

to the ethernet interface

of the PC. Other cables may not be suitable!

Finally, establish all necessary and desired connections to the DUT or the test environment.

2.3

Driver Installation

2.3.1 Windows Device Driver

PCIe/ PXIe can run on Windows 7, 8 and 10. The plug-and-play capability of Windows automatically launches a

driver installation for each newly detected hardware component through the Hardware Wizard. With the

exe

file

included on the enclosed CD, the Hardware Wizard can install the device driver. A restart of the system is not manda-

tory.

The stand-alone box

G CAR 6281

can also be operated under Windows 7, 8 and 10.

2.3.2 G-API

The

G-API

(Göpel electronic Application Programming Interface) is a software interface. It supports various hard-

ware products from goe and gives the user the opportunity to integrate them into theirown applications. The en-

closed CD contains the setup for installing the

G-API

, which will guide you through the Hardware Wizard. For more

information about

G-API

, its installation and about the

Hardware Explorer

, see the

G-API Quickstart Guide

2.3.3 Network Configuration

When using the ethernet interface, no driver installation is required to communicate with the control computer.

The device can be addressed directly via the IP address. However, to address the device, you will need a network

adapter that has a valid IP address and subnet mask. Otherwise the PC / Laptop will not be able to communicate

with the

Multibus Controller 6281

in the network.

For this setup, open the ”Properties” dialog of the corresponding network adapter and select ”Internet Protocol

Version 4 (TCP / IPv4)”.

G PCIe / G PXIe / G CAR 6281

Содержание G CAR 6281






































Результаты поиска

Содержание G CAR 6281

Отзывы:

Бренды по названию

Популярные бренды

Gopel Electronic G CAR 6281, Руководство пользователя

Результаты поиска

Содержание G CAR 6281

Отзывы:

Бренды по названию

Популярные бренды