Hardware
2-6
basicCON 4121 – User Manual
On the front side, you find the following elements:
(8)
UUT Power In
UUT Supply – depending on the Media Interface Module
(9)
Digital IO/ CAN
15-pole DSUB socket for connecting the digital I/Os as well as
the integrated CAN bus
(10)
Media Interface
Media Interface Module
included in the Media Interface Slot
(11)
Status
four Status LEDs
Power supply of the
Video Dragon
is provided via the
Power
connector by a coaxial power plug (2.1 x 5.5mm/ plus polarity inside).
The device can be supplied via the delivered power supply unit or an
own voltage source.
The range of the supply voltage should be between 7 and 28V DC, the
provided power should be 20 Watts at least.
The LEDs (11) indicate the current operating status of the
Video
Dragon
according to the following table:
LED1
LED2
LED3
LED4
Annotation
Alternately blinking
Bootloader software runs
blinking
Firmware runs
ON (shortly)
Execution of a Firmware command
ON
Ethernet connection established
ON
Video output active (Generator mode)
Video lock active (Grabber mode)
Figure 2-5:
Connections – Front side
2.3.3
Power supply
2.3.4
LEDs/
Status display
9
10
11
8
