2
3. Installation
Step1. Fully charge the battery for at least 8 hours before your first use.
Step2.
Install SIM Card:
(1) Remove the back cover of the device as illustrated.
(2) Push the holder top (with an ellipse hole) leftward to loose it.
(3) Pull the holder top up. Insert the SIM card by sliding it into the card holder
slot, with the chip module facing to the connectors on PCB, as shown in
the picture.
(4) Flip down the holder top. Push the holder top downward, and let it snap in
completely.
Step3. Put the battery cover back after insert the battery.
Step4. Turn on the unit, and check if the GPS can work properly or not.
※
When GPS has got the position fix, the
GPS LED
will turn from steady orange light
to “blinking orange”. Check if the GPS LED has turned to “
blinking orange light
” in
about 1-3 minutes.
