GOONAS INC. LaDrive User Guide V1.0
2880 Zanker Road Suite 203 San Jose, CA 95134 USA
Contact: [email protected]
2
Product key interface:
Static Protector : This part is used to prevent LaDrive with static discharger damage.
USB 5V DC Power Input: Ladrive shipped without battery, the whole power supply is from
this USB Power compatible jack, 5V 1A charger or 5V 1A Power Bank can be used to power
LaDrive, any notebook computer USB host with 1A supply ability may used too, the peak
current of LaDrive will be 800mA when signal is pool or distance is far from it’s upstream
WiFi router connected.
User interface LED indicator: the only user and machine interactive each other is a LED light.
When cold powered to LaDrive after 3 seconds, the LED will light up until Linux OS is
booted up. LaDrive boot up process need about 50~80 seconds before it enter idle state. The
LED will fast light up and down when users forget to feet a micro SD card to it. The LED
light will flash in 2 (two) seconds frequency when LaDrive isn’t satisfied with internet
connection, the LED will flash when Internet connect is established, received files, send files
to his master or swap heartbeats information with it’s upstream wireless router connected to.
The heartbeats will between in 20 and 60 seconds frequency according different LaDrive
firmware used.