Q11: Can this unit be used as a jump starter and what are the steps?
A:Yes you can start a 12V car in emergency.Steps as below:
1.Insert the jumper cable into the unit.
2.Connect the clamps to the car battery. Red to po),black to negative(-).
3.When the screen shows "READY" , go to start the engine.
Note: You have to press the BOOST button when the car battery is too low to detect or totally
dead.
Q12: How do you know if this unit is connected to the vehicle correctly?
A:
With the battery clamps connected to the vehicle battery, if the READY(Solid) appears
on the screen, it means clamps are connected correctly, while if X appears on the screen,
it means it's reversed.
Q13: What should I do if this unit can’t start a vehicle?
A:
Recharge this unit fully, and try to press the “BOOST” button after connecting the vehicle
battery correctly, READY(Solid) will appear on the screen, then start the vehicle within 30s. If
it still does not work, contact us at: [email protected] ( Attach your order ID).
