How to connect The Underfacer.
If you have a vintage fuzz or wah, or any pedal that doesn’t like
being after a buffer, plug directly into that pedal, and from there go
to the input of The Underfacer.
Master mute
This is situated at the very end of the circuit before the L and R
outputs. With RMT connected you can access the master mute
from the top of your board. Tap RMT to tune silently, as a kill switch
for song transitions without delay and reverb trails, or if you need to
troubleshoot your board without sending unwanted noises to FOH.
When RMT’s LED is on, the master mute is active. RMT overrides
The Underfacer’s onboard mute push button, no matter which state
it is in. The Underfacer’s LED is solid when muted and flashing when
un-muted.
The Underfacer can power up muted or un-muted, the choice is
yours. To change this, hold down RMT’s foot switch, plug in power
and then immediately release the foot switch.
AMP
AMP
TUNER
GUITAR
RMT
DRY PEDALS
(compression,
overdrive,
boost etc.)
STEREO WET
PEDALS
(delay &
reverb etc.)
Содержание THE TX UNDERFACER
Страница 1: ...THE UNDERFACER MANUAL...
