A. Vertically
1. Push the USB Hub from A all the way down
until you meet the stopper. (Refer to
Figure 1
)
2. Push the USB Hub all the way in until
you hear a click. There is a track on
both the top and the bottom so you can
put it either way depending on your
situation. (Refer to
Figure 2
)
B. Horizontally
d-off
1. Have the hole of the stand facing up and
push the clipper to the hole of the hub
between the stand-off. Make sure you here
a click. You could push the stand in from
the left or the right. (Refer to
Figure 3
)
C. Fasten Magnetically
You can secure the USB Hub on the computer table or steel frame.
4