Goodway GPW-1000, Инструкция по эксплуатации и обслуживанию

Страница: 10 / 20

8
Multi-Jet Nozzle ( P/N PWN-002)
NOTE: Maximum pressure with nozzle (P/N PWN-002)
is 1,000 PSI (70 BAR).
Supplied with a hardened stainless steel spray tip
containing four orifices each marked with orifice
numbers as follows:
Orifice No. Spray Pattern Usage
00045 Solid Jet Concentrated Cleaning
15045 15° Flat Spray General Cleaning
40045 40° Flat Spray Large Area Cleaning
1520 15° Low Pressure Pick up Soap or Chemicals
IMPORTANT — INDEX NOZZLE WITH PRESSURE SHUT OFF
4. It takes several seconds before the soap reaches the spray nozzle.
5. Soap is always applied at low pressure. (Siphon injector is activated at low
pressure only).
CHEMICAL OR SOAP INJECTION: GPW-1000/GPW-1000-P
The GPW-1000 and GPW-1000-P utilize quick disconnect nozzles. To initiate
chemical/soap injection, install the nozzle with the large orifice. This nozzle
delivers low pressure [200 PSI (13.8 BAR)] and automatically activates the siphon
injector to apply chemical or soap. It takes several seconds for the chemical or
soap to travel through the high pressure hose to the nozzle.
The four other nozzles deliver full pressure with differing spray patterns.
To switch from one nozzle to the other simply:
1. Release the trigger to stop spray action.
2. Pull the ring back on the quick disconnect coupling. The nozzle will
be released.
3. Install the desired nozzle, pushing it all the way in ensuring that it is
properly seated. Nozzles can not be changed while spraying.
SOAP INJECTION: GPW-2003/GPW-2502
Use only a liquid soap with the GPW-2003 and GPW-2502 To initiate soap