12
CLOCK / TIMER OPERATION
CLOCK
The clock (if it is set) will be shown in standby mode.
To view the clock in any source mode (CD or TUNER for example).
Press TIMER SET button. The clock will be displayed.
If the clock has not been set, "00:00" will start flashing.
CLOCK SETTING
The clock can be set in 24-hour mode.
1. Press CLOCK button on the unit or on the remote control to select clock mode.
2. Press and hold MEM/SET button on the unit or on the remote control more than 0.8 second to select clock setting mode.
The hour indication will start flashing.
3. Press
button or PRESET button on the unit or on the remote control to set the hours.
4. Press MEM/SET button on the unit or on the remote control to confirm the selection.
The minute indication will start flashing.
5. Press
button or PRESET button on the unit or on the remote control to set the minutes.
6. Press MEM/SET button on the unit or on the remote control to store the setting.
The clock will start working.
7. To exit without storing the setting, turn on the system.
TIMER SETTING
The system can switch on to CD or TUNER mode automatically at a preset time, serving as an alarm to wake you up.
Important!
Before setting the timer, ensure that the clock is set correctly.
The timer can only be activated from standby mode.
1.Press CLOCK button on unit or on the remote control to display CLOCK.
2.Press CLOCK button on the unit or remote control again to select timer setting mode. " ON" will flash on the display.
3.Press MEM/SET button on the unit or on the remote control to select the clock-setting mode.
The hour indication will start flashing.
4.Press button or PRESET button on the unit or on the remote control to set the hours.
5.Press MEM/SET button on the unit or on the remote control to confirm the selection.
The minute indication will start flashing.
6.Press
button or PRESET button on the unit or on the remote control to set the minutes.
7.Press MEM/SET button on the unit or on the remote control to store the setting.
8.Repress CLOCK button on the unit or on the remote control once and repeat above 3-7 to set " OFF" clock.
9.Repress CLOCK button on the unit or on the remote control once the last desired source "CD", "TUNER", "TAPE" or "AUX"
will display. Then hold MEM/SET on the unit or on the remote control more than 0.8 second and the previous source "CD",
"TUNER", "TAPE" or "AUX" will start flashing.
10.Press button or PRESET button on the unit or on the remote control to select the desired source.
11.Press MEM/SET button on the unit or on the remote control to confirm the selection.
12.Ensure the system is in the standby mode.
When the preset time is reached, the selected source will play or switch to standby mode if the timer has been activated.
