Goodmans MICRO1106DAB, Инструкция по эксплуатации

Страница: 14 / 20

DAB operation (contd.)
Selecting Stations to listen to in the Station List
There are two methods available for selecting a station to listen to from the Station List
These methods are called “Direct Mode” and “Indirect Mode”
Please note that stations can be removed from transmission by the broadcaster and this will be indicated in the
Station List as described in the previous section of this manual
Direct Mode
This mode uses the “Prev” and “Next” buttons to select the required station from the Station List
This mode works as follows.
Using the fictional Station List at the beginning of the DAB Operation section of this manual as an example.
When listening to “C-Example Station” and the “Next” buttons is pressed, the receiver will immediately tune the next
station in the Station List “D-Example Station”.
When listening to “C-Example Station” and the “Prev” button is pressed the receiver will immediately tune to the
previous station in the list “B-Example Station”.
NOTE :
Don’t forget the Station List is cyclic so continuing the selection down past the bottom of the list will jump to
the top of the list and vice versa. Pressing and holding PREV or NEXT Buttons will scroll quickly through the
station list, releasing the button at the required station will cause immediate retuning to the selected station.
Indirect Mode
The Indirect Mode of selecting stations from the Station List uses the “UP”, “Down”, and “Select”
buttons to choose a station to listen to,
This mode works as follows
Press the “UP” or “Down” button and the second line of the display will change to show the station above or below
the one currently being listened to in the list The top line of the display will continue to show the name of the station
currently being listened to and the audio from the station will continue to be heard. (Pressing and holding the up or
down button will scroll the list at a faster rate)
When the required station is shown on line 2 press the “Select” button to confirm selection. The name of the station
will then move to line 1 of the display and after a brief pause, the audio for the station will be heard.
Line 2 of the display will return to the information that was selected prior to the “Up” or “Down” button being pressed.
With the exception of the “Select” button the only other button that can be used to exit this mode is the “Power”
button.
13