Goodmans GTVL32W8HD, Руководство пользователя

Страница: 11 / 13

Do not use old and new batteries together.
Do not use different types of batteries (for
example, Manganese and Alkaline batteries)
together.
Note that there are chargeable and non-
chargeable batteries. Do not attempt to charge
non-chargeable batteries.
Remove the batteries from the remote control
unit if you do not intend to use the unit for a long
time.
Do not drop the remote control unit.
Do not subject the remote control unit to
physical shocks.
Keep the remote control unit dry. Wetting it may
cause the unit to malfunction.
Replace the batteries with new ones when
operation of the unit deteriorates.
Precautions when using batteries
NOTE:
1 2
Connect the mains cable to the mains input socket
located at the rear of this TV. Connect the other end of
the mains cable to a 230VAC mains socket. The TV's
power switch has been already left in its ON position at
the factory. The Power/Standby light on the front panel
should change from red to green colour and in a short
while the LCD screen should light up. If the
power/standby light is not illuminated press the power
switch located underneath the left side of the TV.
POWER ON / OFF BUTTON
Remote control Stand by button ,switch the TV from
on to standby or from off to operate.
Operating the TV
- 11 -
TUNE SETTING
Colour system
Sound system
<V->or<V+>key to change
Current Prog
Program Save
Fine Tune
Skip
Auto search
Search
PAL
BG
1
OFF
TUNE menu
1. Press MENU button 4 times.
2. Press PROG - button twice until Auto Search is
highlighted.
3. Press the VOL + button to start auto tuning process.
4. After several minutes the tuning scan will stop and
the TV will show the first TV station memorized into
Programme 1 location.
5. Any non / ghost stations can be removed by
selecting the station to be erased and repeating point
1 above then using the VOL + button highlight SKIP
function then press the VOL + button to change OFF
to ON. Press MENU button to escape from the menu
and if necessary repeat this operation to remove other
non stations. Note that these non stations will be
shown if the numeric key pad on the remote is used to
change channels. When using the PROG+/- buttons
these stations will not show.
By default colour is set to UK PAL.
By default sound is set to UK I.
Important: Make sure that the TV aerial is connected
and if a VCR is being used that this is also connected
and switched on.
MANUAL SEARCH
1. Press "1" on the remote numeric key pad.
2. Press MENU button 4 times.
3 Press PROG - button 3 times until SEARCH is
highlighted.
4. Press VOL + or - to enter the manual tuning
menu.
5. Press Vol + / - to start the manual tuning. In a
short while a TV station will show and the tuning
will stop. If this is the desired station to be stored
in PROG 1 position then press the MENU button.
The station will be stored in PROG 1 position. If it
is not the correct station then press the VOL+/-
button and start manual search until the desired
station is located. To store other station press
button 2 on the remote and repeat the above
instructions.
SOURCE BUTTON
Press repeatedly to select TV, AV, YCbCr, YPbPr, SCART
1, SCART 2 , PC monitor, DVI monitor mode.
Fine Tune
When Fine Tune is selected. The frequency data is
fine-tuned in upward or downward direction by the
VOL+/-buttons.
Skip
Press the VOL+/-buttons to set skip function on or
off. When the skip function in on ,the current program
number will be skipped.
MENU BUTTON
1.pressthis button to display menu PICTURE
SETTING , SOUND SETTING, SYSTEM SETTING,
TUNE SETTING and PICTURE POSITION can be
selected by the PROG.+/- buttons.
TV model:
PICTURE SETTING SYSTEM SETTIGN SOUND SETTING
TUNE SETTING
TUNING IN THE TV STATIONS (Automatic Search)
TUNING IN TV STATIONS ( MANUAL )