Goodmans GTV26WLCD, Руководство пользователя, Страница: 10 / 16

- 8-
TV Aerial input socket
110-240V AC, 50Hz only.
Do not use old and new batteries together.
Do not use different types of batteries (for
example, Manganese and Alkaline batteries)
together.
Note that there are chargeable and non-
chargeable batteries. Do not attempt to charge
non-chargeable batteries.
Remove the batteries from the remote control
unit if you do not intend to use the unit for a long
time.
Do not drop the remote control unit.
Do not subject the remote control unit to
physical shocks.
Keep the remote control unit dry. Wetting it may
cause the unit to malfunction.
Replace the batteries with new ones when
operation of the unit deteriorates.
Precautions when using batteries
NOTE:
1 2
To switch the TV on
Connect the main cable to the power input socket,
Press on/off switch at the rear of the TV. The TV
switches itself and the LED indicator on the front of the
TV change from red to green color quickly.
Press the button on the remote control or TV, the
TV will switch to stand-by mode and the GREEN LED
Will change to RED.
To switch the TV off
" "
Switching the TV ON/OFF
Operating the TV
TUNING IN THE TV CHANNELS
Make sure that all connections including the TV aerial
have been made before turning on the TV.
If this is the first time that the TV has been powered up, a
message (Ensure TV aerial connected press
"
VOL+
"
to
start search) will show on the TV screen. Press
"
VOL+
"
Button, the TV searches all channels and stores the
automatically on the TV. Press any other button to cancel
this operation.
After the
"
VOL+
"
button has been pressed the TV will
scan all channels and automatically store the channels
into the channel preset memory. When Scanning has
completed the TV will show the first TV station stored in
CH memory . Press the
"
PROG+
" "
PROG-
"
buttons to
see the other stations stored.
Following the +/- marking in the battery
compartment.