SPECIFICATIONS
TROUBLESHOOTING
- Decrease volume level by pressing
on front
panel or
on remote control.
Sound distortion
Volume level too high
- Distortion and noise are easily noticed with
high-powered speakers when playing poor
quality audio source, esp. WAV and MID files.
Try a different audio source such as a music CD
or change better quality audio player.
Sound source is distorted
System is not
Responding
Malfunction
- If the volume buttons on the top of the unit
work, then check the remote control battery.
To reset: unplug the power and remove
batteries, after 1 minute plug back in
- Please contact customer service .
Solution
Symptom
Problem
No Sound
- Make sure your iPod is on, and a track is
selected for playback.
No playable file on iPod
Your iPod is not charging
- Make sure the power cable is securely plugged
in to a functioning wall socket. The symbol on
the small connector is matched with that on rear
panel of the
. (Refer to Figure 4 on
page 4.)
- Make sure your iPod is firmly seated in the dock.
GSPK29iP
After quickly undocking
or docking your iPod
- Remove your iPod from the dock, wait for 5
seconds, and return it to the dock.
- Unplug the power cable for 1 minute, then plug
it back to reset the system.
iPod does not dock
properly
- Remove your iPod from the dock, wait briefly,
then reset it. You may need to do this for
few times.
Audio power(THD=10%): 3W RMS X 2
Speaker Units: 2''
2
Frequency range: 120Hz
20kHz
Rated Load Impedance: 4
(Max 7W)
Notes:
1) The specifications listed above are for reference only.
2) The technical specifications of this device are subject to changes
without prior notice.
Power Rating: 100-240V
50/60Hz
Product Dimension :
250
45 mm
Net Weight: 530g
7
8
UMA0360A
