This set is designed to play only compact
discs bearing this
identification logo
(logo must say DIGITAL AUDIO).
1. Press the Power button.
2. Press the CD button to select CD mode.
3. Press the CD Door Open button to open
the CD Door.
4. Insert a CD with the LABEL side facing UP,
close the CD Door by gently pushing it
down.
6. LISTENING TO A COMPACT DISC
TO LISTEN TO A PRESET STATION
(after you programmed them)
1. Press the Power button, the Stand-by
Indicator will be off.
2. Press the RADIO button to select radio.
3. Press the Band button to select your
desired wave band.
4. Press the Preset/Repeat button to select
the memory location (01-10). You will
receive the station you stored into that
preset memory. Pressing the button
several times will give you the different
preset stations you stored into the preset
memories 1 to 10 (Example: Pressing
the button 3 times will give you Preset
Number 3, press the button 4 times will
give you Preset Number 4). Preset
Number will show in the display.
5. To turn off the radio, press the Power
button again, the Stand-by Indicator will
be on.
PLAYING A COMPACT DISC
5. The display will show "
", and the total
number of tracks and the total play time
of the disc. (If the disc is upside down or
damaged, the display will show "
",
and then "
" will be shown).
6. To start the music, press the CD
Play/Pause button (wait a few seconds
for music to start). The first track number
"
" will appear in the display, and the
disc will start playing. The elapsed time
shows in the display.
7.
djust the volume.
8. To p a u s e p l a y b a c k , p r e s s t h e
Play/Pause button, the elapsed time will
flash to remind you that you are in pause
mode.
9. To resume the music from pause, press
the Play/Pause button again.
10. To stop playing music, press the CD
Stop button.
11. To turn off the unit, press the Power
button again, and the Stand-by indicator
will be on.
Press the Volume Up/Down button to
a
The
elapsed time will be steady on (not
flashing).
